oOple.com Forums - Out Drive cup play on v3 Geared diff.

oOple.com Forums (http://www.oople.com/forums/index.php)

- Team Durango (http://www.oople.com/forums/forumdisplay.php?f=80)

- - Out Drive cup play on v3 Geared diff. (http://www.oople.com/forums/showthread.php?t=90224)

The Chef

10-01-2012 07:08 PM

Out Drive cup play on v3 Geared diff.

Hi Guys prepping my V3 for Petit and I've noticed play in my out drives. Do I Shim them it is defo not play in bearings should I shim them between the drive cup and the bearing?

Advice please as this is my first experience of geared diffs.:thumbsup:

Stu	10-01-2012 07:12 PM

Up/down play or side-to-side?

The Chef

10-01-2012 07:17 PM

Well with the diffs all in situ as they should be I can wobble the out drive up and down and front to back or round and and round if you take my meaning.;)

JohnM

10-01-2012 07:39 PM

Just leave them as they are, I'm sure mine have been doing the same for over 2 years now, still on the first set of gears:thumbsup:

coleman758

10-01-2012 08:36 PM

If its the outdrive for the driveshafts, Ie the ones that go to the hubs, its normal. Its because they run inside the rubber seal.

If its the input shaft, Ie the one that goes to the spur gear, thats not so good.
check bearings and shims.

Hope that helps!

mark christopher

10-01-2012 08:57 PM

Quote:

Originally Posted by coleman758 (Post 605520)

plus 1 outdrives are normal

The Chef

11-01-2012 08:13 AM

Its the drive cups coming from the diffs to the drive shafts not the hub end.

All times are GMT. The time now is 03:52 PM.