Hi Dave,
No, it shouldn't. Old or new.
You have seen mine at Southport, thats how it should sound.
How tight is the tension of the belt from the underside. Mine is quite literally tight enough to twang like a violin string. This goes against what would normally be recommended as a losser belt is more efficient - but with the amount of power we now have, I found it necessary to tighten the belt to this extent. To get it so tight, Id tighten it as tight as possible with all transmission parts in place, and then remove the layshaft and move the screw another 1/2mm - 1mm.
I also run the slipper locked. I say locked meaning the spring is completely compressed - but it does still slip a little.
Having the newer pulleys and rollers will make a big difference, and make sure all of these are in a straight line, otherwise the belt will wonder up the sides and something will mangle very soon.
Chazz's recommendation of striping and rebuilding is a very adviseable one. If you don't have enough time, then do atleast completely strip the transmission and refit - pay attention to postion of belt on pulleys and make sure teeth on pulleys are all good.
Chris
__________________
JESpares JESpares JESpares JESpares JESpares
www.jespares.com
|