View Single Post
  #4  
Old 19-09-2008
MattW's Avatar
MattW MattW is offline
Mad Member
 
Join Date: Jan 2006
Location: Cambridgeshire
Posts: 1,396
Send a message via MSN to MattW
Default

I think from ease of drive to full on axe murderer, it goes soemthing like this:

Locked+diff, one way+diff, locked+one way diff.

So it's kind of an "in-between". I usually go for one way diff as Si said, and i built the car this way for Nathan for F3's. He ran it like this for the start, but swapped out to one way pully/diff. The reason he said for this was that the track was very cut up. If you stayed on the worn stuff, you were fine with normal one way. However, if you got a wheel onto the fresh grass it would pull that corner. So, with the one way layshaft/diff, you get most of the benefits on one way, but without this negative.
__________________
Matthew White
Reply With Quote