My understanding is that if you remove the plastic spacers between the fan and the speedo it fits in without touching the shell, but I've never seen this myself.
If it just touches a fraction then if you're getting a kit and/or a new shell you could fit it up and then heat the shell and push it out a fraction, easy enough to do!!!
I know Ellis has fitted the Nosram speedo AND recevier (small spektrum one) in front of the motor so there is a fair amount of space in there. Personally I have a Tekin G11 speedo (quite large) and a fan in front of the motor and there is space to spare. I chose to run it this way withe the receiver at the rear right of the car and the handout transponer on the rear left side for balance.
Dan
__________________
Nortech is ACE!
|