Quote:
Originally Posted by Cassp0nk
I posted this on another thread. Should help:
The way the profiles work I believe is as follows :
- There is one 'active profile'. This is totally seperate to the 5 profiles you can select, and is the only one the controller ever actually uses.
- There are 5 saved profiles. 3 of which are defaults from losi and 2 of which you can modify. These are never used directly.
- When you select a profile, that profile is loaded into the active profile. i.e. you are never using a saved profile directly. You are simply loading it into the active profile.
- The QPC only modifies the currently loaded active profile.
So if you select a profile and then modify with QPC, the saved profile is completely untouched, what you have done is load it into the active profile and then modded that with the QPC.
The instructions are pretty poor explaining this (in fact they don't), but that is the only way of working that made sense to me from what little the docs said and my experience.
|
Good explanation, that's what I was trying to say
