Quote:
Originally Posted by pizzaman
can anyone tell me if these will fit on the rear x6 squared rather than after cut the standard b4 ones
Thanks in advance
|
Chazz is corrct. If you have a stock X6^2 you can use normal B4 turnbuckles. If you have the E speed hangers you need shorter ones, if you use the long Losi ball cups you can get away with 1"1/4 (32mm) turnbuckles. If you use the B4 ball cups you need a slightly longer turnbuckle, 1"1/2 (38mm) is the smallest you will get away with.
The TC4 has 3 different length t bucs, the longest of which is 1.3" (33mm)