coversion
this is great to do with your losi and it's not that hard either. the only thing i have found is that the losi chassis does flex alot more then the x-6.
i'm now in the process of making a modification to make my losi cr more rigid so the chasis plate does not split under stress of my 7700kv.
mods done, its not to bad considering i had not alot of aliminium to play with. hardest part was tapping the bottom so it would thread on to the screw in the chassis.
after fitting it, i had to trim the gear case so it could clear it. i now have the cover held by 1 screw and a bit of battery tape..it does the job. another thing i will say is once you do this, if running the 88spur you will be limited to a 22/23 pinon. to cure this you could use the 78 spur.
__________________
EAT, SLEEP & RACE.
Keeping fast motors reving hard.
signed...migsy
racing made better by Losi, Team Xtreme, HPI BAJA 5B. novak, castle creations, trak-power lipos bantam B6 and my SMR nicely done by huski sport uk.  local club: Cwmaman RC Jammers.
www.the-pred.co.uk
RC BEARINGS 4 U.
Club 22 (admin)
Losi22, losi xxx cr
losi xx-4, losi xxx-4G
baja 5b 30.5cc.
Last edited by migsy; 21-05-2009 at 03:14 PM.
Reason: modification on car.
|