hi andy,as mentioned b4,make sure your shell is properly cleaned.i have found that tamiya spray cans are the best and so is their masking tape. a little more expensive,but the end results will be worth it.after you have got your design,clean'd, masked and trimmed,try running a plastic card (credit card size) over the masking tapes edges,to help stop the paint bleeding.just remember,always clean hands,light coats of paint(especially the 1st one),take your time,dont rush and enjoy doing it. cant get photo of my old t/c to upload so will try in a min,all done with spray cans. good luck and be creative !!
|