@ Roger - Roger running outdoors with my B44 last year on a 5.5R I was pretty similar to you using between a 21-23 tooth pinion, Caldicot is a relatively small indoor track which is usually quite technical and there is definatley a need to gear down.
@ Pinky - I ran at Caldicot a few times this year with my CAT SX and last with my B44 and always with the 5.5R in on a GTB and Trakpower Lipos, I would suggest you gear down as the track dose not justify a big pinion and top end heavy power...
In my CAT I ran a 22 outdoors pretty much all season but when I came over there I needed to drop to a 17, would have gone to a 16 if I could have got the motor close enogh to the stock spur, It still got a bit warm and I did try with my undertray off to help with the ventilation too..
Your 6.5 on a stock spur (84 If I remember correctly) and a 17 Pinion will give you a final drive ratio of 12.352 which in theory should be fine..
Try and be smooth on the throttle too as this will help