I'm not sure when I was stood right next to you in the hall.
If you don't actually talk to me I can't respond (simples).
I'm guessing if it's munching the centre out of the spur gear, then the boss on the slipper clutch hub 310012 is too small in depth and the gear is not being allowed to spin on the hub properly. The pads are the only things that should engage the plates.
We can rule out spurs as they are moulded and don't change.
If you have a seized bearing on the layshaft, this could be giving you heat. Check the slipper assembly spins in the bulkheads without any drive shafts in.
Back off the 5 screws underneath the bulkheads and check the slipper assembly is lined up. If you've had a good old shunt and put the bulkheads out of alignment, this will be giving you heat issues.
From your first post though, the slipper hub seems to be at fault as tightening up the slipper seems to make no effect, so you are probably tightening the two hubs against each other rather than the hubs against the pads.
Like I said, I'll have a look on Sunday, just make sure you actually bring it across and not just mention it...
Quote:
Originally Posted by carlin
Hi Adam,
You thanks for the reply.
But was funny as you was stood right next to me, when i brought this up in the hall.
I was talking to you all but you must not of heard me dont worry about it i will show you Sunday.
Nathan & the other guy cant remember his name know how much problems i have had. They was even scratching thier heads said to me tighten it right up. Still was stripping centres out?
Nathan W has been great help always helped me out with friendly approach too.
Thats why i put use much as cause you never responsed, so sorry if you didnt hear the conversation it wasnt directed just at you more the car too bit annoyed.
I will sand down the plates do you think i should also rough up the slippers too?
I will check everything else i had quick look last night all the drivetrain looked ok.
Will come see you Sunday Adam, because its very strange thats all.
Thanks for the reply
|