Ron, you don't 'need' to hold the brake and then go to neutrel when you switch it off.
every single time you even touch the brake it 'updates' the max temperature. this is reset when you turn the speedo on 'normally' next time.
for the record, I run a Sphere TC in my 4WD, but I did swap out the MASSIVE wires to use normal 13AWG wires.
the actual reading for the flashes is as follows
for every flash over 5 its worth 5 degrees away from shutdown.
so if you count 8 flashes, its 3 over 5 so thats 3x5=15 degrees away from shutdown.
Reto would not tell me the shutdown temp but he just said that its 'Freaking Hot'
I get between 13-20+ flashes out of mine, even running 15 minute practise sessions
|