Chris its 8 degrees per flash typo i guess
How to read-out the temperature:
Switch at „OFF“ position.
Keep MODE button pressed while you turn switch to „ON“ (then release button)
SET LED will start to flash blue (MODE LED is off), now count the number of flashes.
• Thermal shutdown of the speedo would occur at 5 flashes.
• The higher the number of flashes, the cooler the speedo ran (e.g. the better it is!).
• Every flash over 5 equals to ~8°C lower internal temp. (e.g. 10 flashes is 40°C below shutdown)
__________________
Mattys the driver,my names carl
|