Quote:
Originally Posted by spiro
Actually, this gave me an idea as I'm writing this post.
1) Grab a loooong screw.
2) Enter a normal nut or lock-nut, apply insanely stiff thread lock at desired point and pass nut over it.
3) Dremel of the head of the screw.
Voila, you have a Lunsford-bit-rip-off with long enough threads for thick towers. Ok, you can go ahead and call me flattering names now.
|
I was thinking something similar, or a very long grub screw (
http://www.modelfixings.co.uk/stainless_grub_screws.htm) so you've always got an allen head at one end for holding onto...