Quote:
Originally Posted by Thomas P
Fatal1ty:
Im no ace, but the old and the new ones (v2) can be build with out any bubbles without any problem. There is one solution for this mr, and it is so easy 
Build the shock as manual, fill her up with oil, to the top..be sure there is NO bubbles in the house...prepare the shockcap, with the screw(installed, BUT not screwed all the way in..) fill the cap almost full with same oil...(no you will not get any mess, if you are little handy), screw the cap on, and relese the air/bleeder screw..screw the cap on tight...and bleed the shock and then rescrew the bleedscrew..
I builded my rear ones forover one month ago, still no leak or air, same in the front
Goodluck
/T
|
As soon as you push the shaft out, some air will be sucked into the shock by the oring.
Sorry, I'm not trying to be a smartarse but you need some air so the shocks can actually work