Quote:
Originally Posted by Gayo
Roger, are you sure everything is working OK on your FS2 parts? I know you are a veteran racer (so I am ) but I didn't find such a handling difference going from the FS to the FS2. Your problem sounds as something is binding, bent, or broken. A stiff CV joint, a gritty bearing or a bent axle can look OK when checked by hand a make a mess of the handling on track.
|
Everything moves freely and falls under it's own weight. New bearings fitted when I fitted the new axles, about 15 runs old now but new for the meeting where Nick drove the car and not a mark on them.
I gave the car a really good look over when I got it home hoping to find something like the above but it all looked fine.