View Single Post
  #12  
Old 26-03-2011
Rich D's Avatar
Rich D Rich D is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Apr 2008
Location: Lincolnshire
Posts: 2,449
Default

That's all good dude and works fine for you I have no doubt. You may of burned a speedo out with a low wattage iron but I've never managed to since I started racing in 1987. Nor have I managed to ruin a tip by filing it. Maybe the Antex tips are different. Nothing wrong whatsoever with my joints. I used a 100w iron to build cells back in the day but personally think it's very much overkill for pcb work. The solder melts instantaneously upon touching the tip onto the board with my 25W iron. Anyway. Peace.



Quote:
Originally Posted by CrashBangWallop View Post
Sorry but have to disagree here - If you file the tip on a modern soldering iron i.e. one with a coated tip you WILL ruin it.

If you have a soldering iron that has an old fashioned solid copper tip then file away ! But still best to use a bronze brush for cleaning the tip then re-tin the tip immediately, Or use a damp NATURAL sponge to clean the tip.

Soldering any RC stuff with a soldering iron of less than 45 watts will overheat speedo's and motor connections.

Key to success is decent solder - the stuff with lead in it and a flux core, 45W + soldering iron, make sure all joints to be made are clean and pre tinned. And last but not least be quick.

Personally use a 75W WELLER soldering iron used for lead light windows with an 8mm round chiselled tip. £35 from a DECENT tool store.
__________________
Richard Drury

See My Feedback

Reply With Quote