The shocks are Losi, from a non-worlds XX4. They are better than the stock Yokomo ones, but as you say it is a touch soft. You just need some stiffer springs. I was using Associated springs, blue at the front, silver at the back.
The shocks are adjustable, they just work differently. Instead of threaded bodies, they use little plastic clamps. Loosen the screw on the clamp, move to the desired location and tighten up.
The wobble from the spur could be the centre bearings. They do need replacing every now and then. I thought they were alright but as I said I didn't use that one much so maybe not. The other option is the spur isn't quite round. You've got an 87tooth spur, only because I can't mesh that with the pinions I use for racing so must use 81 or 84t spurs. I know at least 1 84t spur I bought was off centre and wobbled in use, so much so i can't run it.
__________________
Yz4 - Yz2
DEX210 - Cobra 4210- DEX410
RC10 Team - Manta Ray - RC10T
Mini Trophy - Blizzard - Wheely King
Tz4 - GT24B
BMRCC
Emergency back-up race controller
(but only if nobody better is available)
|