Quote:
Originally Posted by Dudders
Hope so!, you sold the wheels to me! 
The Hex's....
 |
Losi wheel hexs for sure 100% (the pin is almost flush with the outer part of the hex, on the AE hexs the pin is approx in the middle of the hex).
This is also why you have so much axle showing after the hex too. For now put two of three 3/16 axle shims over the axle (between hex and wheel) and this will be a temporary fix. You only want to see approx 1mm of "plain" axle before the thread starts....
HTH, Darren