Quote:
Originally Posted by Razer
Just sand down the lumps underneath the lipos, and you'll be good to go!
|
Are the lumps solid on the LRP packs as my old orion ones were hollow?
Quote:
Originally Posted by Gnarly Old Dog
Jon - I know the height of the shelf won't allow for a plate under the LiPo so if your cells do have bumps to locate in other types of chassis then they could cause a problem.
Rather than sand the cells - you could cut the shelf away and fit a carbon shelf that is slightly raised from the standard one - or if it is only marginal, take a sanding drum to the underside of the ESC shelf to 'gain' a bit of height.
HTH
|
Thanks Andy, there is no hope with weight underneath the cells and they don't push all the way back to the foam when straight on the chassis.
I think I can probably get away with sanding a little bit of the ESC shelf, as I don't think my skills allow me to make another shelf.
It's a shame the 22 seems a bit fussy on what does and doesn't fit depending on what chassis configuration you use.