They only other weak part is the servo saver assembly so you should have some of those spare if you are not running the Tresrey or Racers Edge aluminium versions. I usually carry wishbones, bearings (SMD metal shield one side rubber the other), front and rear bulkhead, hinge pins (nice to put in after breaking a wishbone then you can straighten the old one when back at home), spur (RW as they are quieter), hubs front and rear (again on if not running the Tresrey hubs), Nortech solid drive pins, diff ring gear and pinion and some 3racing TI turnbuckles just in case. I also use AE slipper pads as they are a little thicker than the Durango ones. Have to say though that I have these spares and have not really had to use them very much at all. In fact I have only done two rear wishbones and a ring gear and pinion since running the car from October 2009.
__________________
Schumacher KC, KD, CAT XLS, CAT L1 | Team C TM2 V2, TM4, TC02 | JQ The Car | Mugen MBX6 | Losi 8T,8BE 1.5 | Durango DEX-410V4 | FTX Blaze | XRAY M18T | Kyosho STR,Surf Dude,Nexus 30 | Nimrif Makara | MFA Spear | She Devil | T-Rex 450SEV2,250SE | Ark X-400 | Protech Butterfly,Zoom 400 | Ikarus Piccolo | VW T4 | Smart 450 | KC-250 | BoltRC Kraken 5" | Emax Nighthawk 250 | Gravity 250 | S550 | Prusa i3 | TronXY X5A | Must stop collecting stuff!
|