Quote:
Originally Posted by oosh123
This may be more difficult than I expected. It is easy to design the layshaft. But in order to use the hubs or plates on both size of the spur, we might need new hubs, as the current hub on the lazer zx connects directly to the first pulley.
|
Mate your thinking too much, its easier when you put the associated plates into the design. The spur i designed and is being sold now will fit perfectly with those plates so we need to account for a longer spring to be fitted and an attachment that can be designed to fit behind the plate on the flat bit of the layshaft like the plate so the pulley in the box can be turned. Otherwise just adding 2mm to the mk1 shaft and also lengthening the screw end by several mm to fit the associated spring and if possible thrust race then just as good.