Quote:
Originally Posted by grovehead
the receivers are the same there just rebranded its doing my head in this now 2 hours and still bloody trying lol
|
I always thought the two TX/RX's were the same but rebranded too, but who told you this - are you absolutely sure?
There may be a subtle difference which is why you are seeing the problem.
To keep things simple I would have gone for the same make as you had.
Try a Google search to see if they truly are interchangeable.
If they are, then it sounds like a busted RX.
One last thing that just came to mind - those trannys can store different models, so have you made sure you are binding to a different model setting than your other RX?
If in doubt, do a factory reset on the TX.
EDIT: another thought - are you 100% SURE the channel 1 servo lead is the right way round and in the right slot?
The BIND plug has to be removed too.
I used to own the eTronix, and doesnt it say in the instructions that you might have to reverse 2 leads of the three coming from your servo? I know this is only in some situations, so make sure before you do it as it might short something out.