Gavin,
I've got an SX3 setup that i used at Southport... I'll send it to you when i have chance over the next couple of days - If you PM me your email i'll attach it.
You will defiantly benefit from un-cut staggers on the front, it just doesn't look the best.
Depending on the oil... I used 32.5 losi in the back with 4 hole pistons and 45 oil in the front with 3 hole pistons, black roll bar on the front and possibly run the shocks on the outer hole on the front wishbones, I also found a slightly slower servo with the expo reduced helped a lot.
try using the core 4 lb springs on the front they are less aggressive and compact at a slower rate. I also found running the car lower helped me with the grip roll situation.
Hope this helps....
Rob
__________________
Schumacher-Racing
|