Quote:
Originally Posted by DerbyDan
As the per the title really - just finishing off building my TM2 & I just wanted to confirm what gearing (pinion) would be a good starting point - my motor is a 7.5 LRP X20 & shall be mostly racing indoors at Silverstone 
Thanks in advance
Dan |
Hi Dan,
To start I ran the standard 21 which powers out the corners well but you just top out straight away on the straight.
The 23 is nice and smooth and gives you a good end of straight speed but out the corners I found it was a bit slow.
The 22 is the best I would say. I used it for the first time at the weekend regional and I ran it yestarday. I doesn't top out neither does it lack out of the corners.
I run the X20 6.5, it's preety quick anyway but i guess its what you prefer.
Hope this help's
Steven