Nice and easy build. The electro install might take a while though.
Pay attention to diff fences on pulley (glue is an option), ceramic balls so you got to set them tight or they will slip (my front was loose at first meeting), just follow the manual for that.
Use threadlock, especially on lower bulkeads/chassis and steering parts need some attention (didn't use enough TL on mine and got to screw it back full on the first heats).
Motor mesh, motor should be leveled with chassis plate and TL on adjustment screws. Not too tight, prefer a looser mesh and watch out both motor mounting screw and mesh screws on every run at first.
|