Hiya
I think you are a bit too soft for flat carpet, this is my B44.1 setup running Losi big bores, we have mostly carpet and a bit of slippy wood but have lumps and jumps as well.
Blue Front springs, 37.5 wt with 1.3 4 hole Ghea taper, inner top shock mount outer lower, silver roll bar. If no jumps I might go to 40 wt
Silver Rear 32.5 wt with 1.3 4 hole Ghea taper, inner top shock mount outer lower, black roll bar. If no jumps I would try 35 wt.
Used to run 89 ballast weight but now use Avid chassis. camber links as factory camber at -1 deg and factory hubs.
If mostly carpet then Schumacher yellow mini pins ballistic buggy med inserts but it can be carpet dependent,
|