[charlesk]

Can't help on a specific setup for the desc210 I'm afraid, but for a 2wd SC my preference would be to set it up as rear motor, use M4 Holeshots at the rear and possibly M3 at the front. (I prefer a slightly understeery car and remember 2wd buggy fronts are a lot narrow than rears whilst sc is the same).
Motor wise I would of thought a 8.5t would be plenty ( driving skill dependent off course).
The track is slippy for most of the lap, and hotter motors will result in more wheelspin/ lack of control IMO...

Originally Posted by TARTMAN

hi guys.
I am doing the SC at oople this year.

wondering what the set of wheels part numbers are for the DESC210.

need a set of wheels and the proline tyres for the event.

I have never run the SC as yet, so any base set up for the RHR dirt track will helps.
shock oils, ride heights etc.

also, anyone raced the 210 on dirt, advise front tyres.
Its got to be proline hole shots on the arse end, but any proline fronts as 2wd
should I stick to the M3 holeshots all round?

also, as dirt is slippy and I prefer 4wd, I run a rapid motor on 4wd, should I be toning it down on dirt for the 2wd SC???

I was thinking an 8.5 or 7,5? I run a 5.5 in my xray xb4 4wd.
Rather not have to much turbo etc on the dirt as in 2wd may make it a bit of a handle.
Any thoughts please???

cheers ooplers.............