Hi mate
It's a THS tuned pipe design for the revo and is almost impossible to get replacement parts now. I'll try drilling another hole and fit a washer on the spring.
Also I've bought a new bearing set as the front bearing was leaking, but the new bearings have seals in both sides and are full of grease. Should I remove all but the front seal on the front bearing like the originals and clean out the grease or fit them as they are?
Thanks
__________________
Team Xtreme Predator X11, Associated b64d, Associated b6.2d, Arc A10, Awesomatix A12, Xray NT1.3
|