I'm having heat issues with my durango 410. I'm using the rs pro and a thunder power 6.5 motor geared with 22 piniong at dual mode with 100 timing, current lim at 80 and no drag break. The esc has a fan on it and runs rather cool according to the leds, about 4 or 5 leds at most. However the motor is loosing power after about 3 min and eventually the car stops just after 5or 6 minutes and the esc shows thermal shutdown with led 1,3,5 flashing. So, can the esc shut down if the motor is getting too hot? I'm thinking of putting a fan on the motor as well. I have tried to gear lower but the car got soo slow. I was thinking of running in sensored mode, gear down and put on a little boost. I have cut the went holes in the body allready and I would prefer to keep the stock body.
|