|
|||||||||||||||
|
|
|
#1
|
||||
|
||||
|
quote from another thread
looks like you can with this one ![]() so how many cells are in a 1s lipo?
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class Last edited by Col; 30-05-2012 at 07:56 PM. |
|
#2
|
||||
|
||||
|
Err one? Thats why its a 1 cell lipo. Perhaps that isnt a 1 cell as not seen one with that capacity
|
|
#3
|
||||
|
||||
|
if it's one cell then why have a balance port
![]() 1s Lipo's from Nosram/LRP are at 6700mah, but that's another story http://www.nosram.com/en/products/ba...c-37v/details/
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
|
#4
|
||||
|
||||
|
The balance lead only has two wires... it has no balance function.
Perhaps it is there for the very small market of people who use trickle chargers that connect via a balance connector. More likely is that it is there because the supplier builds the packs with a balance lead and hadn't bothered to remove it from the design. More importantly, does it really matter? |
|
#5
|
||||
|
||||
|
Quote:
Ditto
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
|
#6
|
||||
|
||||
|
thanks all
a club member was asking on FB and I didn't have a clue
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
|
#7
|
||||
|
||||
|
Its so you can use a cheapo charger some only charge through the ballance leads think the bottom line orion lipo chargers like the Orion Advantage IQ240 use ballance leads only.
|
|
#8
|
||||
|
||||
|
I'm just guessing here, but maybe its a 1S2P pack. So to get the capacity they have paralleled two 1 (3.7v 2300mAh) Cells, hence the need for a balance charge lead. I'd expect it to be printed on the label though, so you can set your charger correctly?
|
![]() |
|
|