DB01 Centre one way (54051)

[T4miy4 Guy]

Has or does anybody use one of these?

I have one and was thinking of fitting it in my501 but am alittle unsure as to how it would perform, could someone possibly explain as to what the advantage`s or disadvantage`s this has over a front one way or as to how they both differ (which surface or type of track is best for which)

(My 501 is raced on an indoor running track and astro turf)

Cheers

Andy

[Si Coe]

TBH Andy I've locked the centre one ways on my D4 and XX4 up for running at Chadderton. They both ran better last round with full time 4wd than previous rounds with 1 ways.
But I did like the one way for Goshen, so might be worth a try. You can try my D4 with and without (takes moments to swap) to see the effect it has.

[T4miy4 Guy]

Originally Posted by Si Coe

TBH Andy I've locked the centre one ways on my D4 and XX4 up for running at Chadderton. They both ran better last round with full time 4wd than previous rounds with 1 ways.
But I did like the one way for Goshen, so might be worth a try. You can try my D4 with and without (takes moments to swap) to see the effect it has.

But i want to know what the difference is... i understand a front one way,but how does a centre one way differ?

Andy

[Migs]

if u are running a centre one way, then u have a diff in the front end, so on power it works just like u are running without a one-way, off power u have the freewheeling effect of the centre one way but the diff is still operating and will still provide a little more resistance to the wheels spinning at different speeds compared to a front one way. My feeling is (though ive not used either in my tamiya but ran them in my cat 3000) the front one way is the more extreme, then the centre one-way is less extreme if u want the one way effect

[T4miy4 Guy]

Originally Posted by Migs

if u are running a centre one way, then u have a diff in the front end, so on power it works just like u are running without a one-way, off power u have the freewheeling effect of the centre one way but the diff is still operating and will still provide a little more resistance to the wheels spinning at different speeds compared to a front one way. My feeling is (though ive not used either in my tamiya but ran them in my cat 3000) the front one way is the more extreme, then the centre one-way is less extreme if u want the one way effect

Thanks Migs pretty obvious really think i`ll give it ago , still waiting on my 511 shell should be any day now .

Andy

[ScottyP]

Spot on Mikey.

Off-power there will be very little difference.

On-power the front one-way will act like a spool.

The car will feel much more aggressive with a front one-way than a centre. Both will give you more off-power steering.

Cheers,
Scott

[Si Coe]

There are 2 types of one way - Centre or Front Diff.
Front Diff replaces the front diff giving each front wheel one way action,
Centre replaces the front driveshaft (D4) or controls the front belt pulley (Cat, XX4). This keeps the normal front diff action, but provides one way drive to the whole front end.

Its called centre as on a belt drive car its mounted on the centre layshaft, but can only affect the front of the car as otherwise you'd have no braking!