cutting brass

[paulc]

hi guys

whats the best way to cut brass / easyest way ?

cheers paul

[pro4nut]

A good set of snips for rough cutting.
A hacksaw with a high tpi, plus a selection of files.
Assuming your working with sheet.
If its bar stock a lathe and a mill....

[moth898]

how thick?

[paulc]

anything up to 4mm if i can cut 4mm then anything less will be easyer

[pro4nut]

Same applies, just depends on what you are trying to make. reduce the tpi as you go thicker.

[paulc]

tpi ??