|
|||||||||||||||
|
|
|
#1
|
||||
|
||||
|
Ive just finished my TRF511 build for this weekends National. I documented it in my blog incase anyone is interested:
http://ne-rc.blogspot.com/2011/04/my...511-build.html Any comments or tips are welcome.
__________________
Schumacher racing http://www.racingcars.com ne-rc.blogspot.com My Trader Feedback : www.oople.com/forums/showthread.php?t=25402 |
|
#2
|
|||
|
|||
|
Looks good, however the 5mm front tower will bend the front bulkhead/tower mount rather than break the tower.
I would also mount the undertray sides on the top of the chassis so you can get the car lower. |
|
#3
|
||||
|
||||
|
Love it and helps those of us still getting together 511 stuff
Sold my Durango last week, so 511 for me too |
|
#4
|
||||
|
||||
|
I can recommend either the lowered buggy wing 54134
or the 201 wing set 54211. Both will last longer then the DF-03 wing. Also the Tamiya hard hex ball studs 53969 in combination with the Grey reinforced adjusters 54257 seem to work perfectly thus far.
__________________
««201, 511&503 |
|
#5
|
|||
|
|||
|
If you take the undertay off you will see a cut line about 1cm from the edge of the undertay. Cut that and mount the side on top of the chassis. If your worried about sealing the car the I would use chassis tape.
I'm racing tonight but will post a pic of my car. |
|
#6
|
||||
|
||||
|
Quote:
![]() What chassis tape do you use? |
|
#7
|
||||
|
||||
|
Thanks for the comments
Quote:
Re: the undertray, I thought a better body seal would be obtained mounting it underneath the chassis. Again, I'll have a think about mounting it above the chassis. If I do this, how do I mount the middle of the undertray to the bottom of the chassis? And will it enable me to lower the car? As the middle of the undertray is still underneath the car, at the same height as the side would be under the car.?
__________________
Schumacher racing http://www.racingcars.com ne-rc.blogspot.com My Trader Feedback : www.oople.com/forums/showthread.php?t=25402 |
|
#8
|
||||
|
||||
|
Very nice blog indeed, only one thing I would say.....yellow wheels are gay
|
|
#9
|
||||
|
||||
|
Chris, what diff covers are they, Nuclear ones?
|
|
#10
|
||||
|
||||
|
JAAD Racing ones, from www.rcracinguk.com
I got a few other things from there ... including the preassembled ceramic thrust races, which are very nice.
__________________
Schumacher racing http://www.racingcars.com ne-rc.blogspot.com My Trader Feedback : www.oople.com/forums/showthread.php?t=25402 |
|
#11
|
|||
|
|||
|
hi chris are you running any weight in the car if so were?
and have you cut the rear springs down? |
|
#12
|
||||
|
||||
|
Hi Chris,
yes, and yes. Rear springs are cut (one coil off). Weight is: Rudebits lipo brass kit: running 2 x 18g centre weights and the outer weights. + 15g on servo for side to side balance (electrics compensation).
__________________
Schumacher racing http://www.racingcars.com ne-rc.blogspot.com My Trader Feedback : www.oople.com/forums/showthread.php?t=25402 |
|
#13
|
|||
|
|||
|
Not as Gay as the pink ones. but I agree with your statement Dave.
|
|
#14
|
||||
|
||||
|
Quote:
Esp. with pink wheel nuts B)
__________________
««201, 511&503 |
|
#15
|
|||
|
|||
|
I've not cut the springs down.
I run the rudebits brass lipo tray with one centre weight. |
|
#16
|
||||
|
||||
|
Quote:
I'm not going to deny that, I'll dig my white ones out.I will be using the TRF201 wing set. I dont think I will do the undertray mod you suggest Matty, Im not sure the benefit is worth it??? I'll have a look at your pics when you get them on.
__________________
Schumacher racing http://www.racingcars.com ne-rc.blogspot.com My Trader Feedback : www.oople.com/forums/showthread.php?t=25402 |
|
#17
|
||||
|
||||
|
Quote:
This is an excellent car as standard out of the box. All you really need is the hard hex ball joints and maybe ceramic or tungsten diff balls. It'll be interesting to see how it goes with all that extra weight and 501 arms on it. Probably like a 501. Not strictly bad but not like a 511... And never mind about yellow wheels being Gay, putting hair gel on yer screws is just wrong.
__________________
___________________________ Neil Adamson |
|
#19
|
||||
|
||||
|
Yeah well... over thinking and playing about with the car is half the fun I think..... I'll see how it goes
![]() Thanks for the wiring tip .... but what exactly is wrong with it? If you think its going to cause problems, then might let you have a go at correcting it on Saturday.... saying that though, I never normally have electrical failures
__________________
Schumacher racing http://www.racingcars.com ne-rc.blogspot.com My Trader Feedback : www.oople.com/forums/showthread.php?t=25402 |
|
#20
|
|||
|
|||
|
To be fair Schnell...thats the best wiring ive ever seen on Chris P car! Hes right, he hasnt had many failures due to electrical problems, ive even seem him finish a race with a speedo hanging out of the side of the car, must have been the cheapo connectors he had used!!!!
Well done Chris, H Final? You would be gutted, and its not your first national, its your 10th or something
|
![]() |
|
|