|
|||||||||||||||
|
|
|
#1
|
|||
|
|||
|
Hey fellas,
Before I start, is there a 1/10th off road/buggy section? I couldn't see one. So, I am after a 1/10th buggy for racing but can't decide on one right now. The track it is going on at the moment is gravel with a couple of loamy bits, it's only a small track and not technical nor fast. This is in time supposed to be changed to a clay pad which a new track will be built upon, most likely something a little more technical. I am not new to the hobby (been at it a couple of years now) but havn't really raced before. The kits I am looking at are; Tamiya DN01/TRF201 Losi XXX CR (I have quite a few spares for the XXX T, should have some to cross over) Losi 22 TQ Racing SX10 Pro Schumacher Cougar SV For some reason the AE B4/B4.1 does not really interest me at all. Any others I should look at? As for the above, could anyone possible comment on their reliability, durability, tunability, how easy they are to work on? As for parts availability, as long as they can easily be found online, that's good enough. I would appreciate any replies. |
|
#2
|
||||
|
||||
|
Most popular atm seem to be:
Losi 22 Cougar SV Kyosho RB5 RC10B4.1 or a conversion of some sort from all those! Vega B4/RB5/Tamiya X6 C4.1
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
|
#3
|
||||
|
||||
|
I run an X6, as I had a B4FT, and wanted to try Mid-Motor.
I love my X6, very strong, reliable, easy to work on etc. Doesnt seem too popular at national level anymore, but still there/thereabouts at regioanl and club. You could also convert from a B4 to a Mid-motor Vega, or C4.1 as well. Hope this helps. Mark
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
|
#4
|
||||
|
||||
|
I agree with Marks posts...the x6 is wonderful. The 22 is still in its early days so getting strong feedback at the moment is difficult. Most top lads who are running 2wd are using mid motor configs these days...although you can still see the old motor on arse models doing well.
Vega is raved about for build quality at the moment but as previously mentioned, the x6 is great and extremely forgiving on those mistakes we all make...there is also loads of set-up advice and general tips available for x6 on the xfactory section of oople. You can get feedback and comments on problems from the lads at xfactory directly which is brilliant in terms of support with your car. Since the x6 squared came about (the latest model) the car is strong and easy to build....check them out here http://www.xfactoryrc.co.uk/ Happy buggy hunting
__________________
Team Durango - Inside Line Racing - Rudebits - dBoots - Trakpower Check out my trader feedback here - http://www.oople.com/forums/showthread.php?t=65776 |
|
#5
|
|||
|
|||
|
Cheers fellas.
I agree the 22 is still a bit new, one bloke at the track recently got one, havnt seen it run though. I don't mind converting a buggy to mid motor but don't really want to pay the price for the conversion (seems to cost nearly as much as the buggy in the first place). I quite like the TRF201, but seems parts are harder to find for them (although my LHS sells Tamiya parts last time I was in, very expensive though). Hmm, I forgot about the Kyosho, I quite like that one also. I have found a Cougar SV Pro with a bunch of spares on ebay for about AU$260 delivered that I think may be a good deal If I remember rightly, I read something a little while back about the gears not holding up? Is this true or is there some other fault with them? Does anyone know what size stick pack lipo fit in these, I already have a couple and would like to use them. Also, could anyone elaborate more on the handling differences between mid motor and rear motor? I got the gist of the differences but would like to hear from people who have driven both, and which type is generally better for a certain surface. I have only driven a 2wd Stadium truck with the motor at the rear (Losi Desert Truck) which I have only just gotten setup for our track (we have only been at it for a couple of months now), just needs more suitable tyres. Only recently I got a Mugen MBX5T which I have converted to brushless (just waiting on the ESC to arrive), this is just for fun though. @JohnM; Haha, righto, thought there was something odd about it. Cheers. |
|
#6
|
||||
|
||||
|
RB5-SP2, super strong, super reliable and everything you need is in the box. Job done!
|
|
#7
|
||||
|
||||
|
Quote:
__________________
Model Junction, Boughton Raceway. |
![]() |
|
|