|
|
#1
|
|||
|
|||
![]()
Hi,
Just finished my TRF501X and looking forward to running it! I do have one question; What is the initial setting for the front and rear diffs, tightness that is... I have a B44 and B4 and adjust those according to the manual, but the TRF manual makes no mention of how to get a baseline setting. Some advice please ![]() TIA |
#2
|
||||
|
||||
![]()
I set my diffs by first beddng them in ( run a motor at low voltage then hold one wheel on the axle for 5 seconds then the opposite wheel, this beds them in), then I lock both wheels and lock the slipper, I then try to turn the spur gear by hand, if it turns, the diff needs tightening.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#3
|
|||
|
|||
![]()
Thank you!!!!!!!!!!!!!!
|
![]() |
|
|