|
|
#2
|
||||
|
||||
Tamiya USA have a scan of the Durga setup sheet - http://www.tamiyausa.com/pdf/setup/58395su.pdf
|
#3
|
||||
|
||||
My base setup - I have been using this on most surfaces, I never touch the rear end but sometimes tweak the front damper fluid or camber link depending on how much steering I need.
sosidge's base setup |
#4
|
||||
|
||||
Probably just being dense but which hole is which on the rear arm on the setup sheet?
1,2,3, aint to descriptive lol. Is 3 the inside or outside??? ???
__________________
Southport P.R.O. / Photographer of semi-naked girls www.srcc.co.uk - www.craigmagee.co.uk |
#5
|
||||
|
||||
3 is the outer.
|
#6
|
||||
|
||||
Here is the setup i've run last few meetings.
Clicky Clicky Tried to copy BJ4 close i could as a starter. Did the rear block mod Jim was talking about. Felt good at Bury few weeks ago but i think i could of done with some more steering on sunday at southport, any ideas? maybe the kit yellow inserts i used were to hard..?
__________________
Southport P.R.O. / Photographer of semi-naked girls www.srcc.co.uk - www.craigmagee.co.uk |
#7
|
|||
|
|||
All-new DB01 chassis locates heavy components such as battery and motor near the center for optimum weight distribution.
Race-proven and reliable 2-belt driven 4WD system is completely enclosed with ABS resin covers to prevent dirt and debris from interfering with drivetrain operations. Chassis features integrated bulkheads, which reduces the number of parts and simplifies maintenance. Tough ABS resin 4-wheel double wishbone suspension system features the same configuration as the TRF501X and provides a wide range of settings options. Brand new buggy body with rear wing is made from lightweight polycarbonate material. Wheels, tires, and Type 540 motor are included. 2-channel transmitter, ESC, running battery & charger are separately required. |
|
|