|
|||||||||||||||
|
#2
|
|||
|
|||
|
Just typed this out for the Schumacher Website so figured I would post it here too to help you guys. Only thing I might change is the rear shock oil back to 20wt (ive ran that all year) depending on the size of the jumps.
This is what Im gonna start with at Worksop : Front - Track Washers - 1mm front and back Roll Bar - No Shock Position Mount - Middle Shock Position Wishbone - Middle Front Rake - 10 Degrees Washers - 2mm Front Link Bracket - 43mm Washers on Hub - 0 Rear - Wheel Base - Short Toe In - 3mm Rear, .5mm front = 3.25 degrees Anti Squat Washers - 2mm Rear, 1mm Front = 1.3 degrees Rear Link Bracket - 37.5mm Washers - 4mm Shock Position Mount - Middle Shock Position Wishbone - Inside Hub Postion - Middle Roll Bar - No Shocks Front - 25wt on 3 Holes Schumacher Grey Springs Diaphragm - Centre cut out and removed Ride Height - Wishbones level Rear - 25wt on 3 Holes Schumacher Red Springs Diaphragm - Centre cut out and removed Ride Height - Wishbones level Transmission- Rear Diff Height - Low Front Diff Height - Low Layshaft Pulley - Pin Through Front Drive - Diff Gearing - 83 x 24 on Speed Passion 5.5 Internal Ratio - 36 Tooth Pulley Tyres Yellow Mini Pin all round, Schumacher Green Inserts. Any questions feel free to ask them on Jimmy's other thread. Si
__________________
Schumacher, Hobby Wing, Thunder Power, Anderson, Sanwa, Trishbits, P-Dub Racing, Rudebits, Inside Line, Nuclear RC, RC Domination, RPC Last edited by Mossy; 16-09-2008 at 09:57 AM. |
| Thread Tools | |
| Display Modes | |
|
|