Check my link but I'll give it a shot from memory. You need the metal parts, 4 ballstuds, 4 bearings/bushings for the rockers, 2 sleeves for the rockers, 2 screws long enough to go through the rocker pivot. I think that's it. If you have upgraded your shocks you should have the ball studs. The rest I had from a TLT kit, used the same brass bushings on it's cantilever setup.
That's for the GT suspension. If you just want the longer wheelbase of the GT chassis, it's a direct bolt up. I don't have one, but I believe that a 7-cell battery would fit with the longer chassis as well. I think it bumps the Tamtech buggies up to around 1/14 scale. My Fox-mini appears much bigger than my Kyosho mini inferno which is 1/16.
Forgot to comment about performance. I'm not a racer and I changed to better tires at the same time as the suspension/chassis change, but I am pleased with it. I wouldn't go back to stock would be a better way of putting it.
|
15-12-2008
Threaded Mode