Go Back   oOple.com Forums > Car Talk > Hot Bodies / HPI

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #21  
Old 13-05-2009
scrawl scrawl is offline
Member
 
Join Date: May 2008
Posts: 22
Default

Well, I ended up purchasing the Cyber 10b. Been patiently waiting for a 4wd that takes stick packs and comes in a Kit.

I'm part way through the build. The only real surprise so far is no bearings were provided for the diffs. Bushings instead. Some of the center-shaft outdrives are plastic, but that could be a non-issue.

Something very minor - it would have been nice if the manual said the 0.2mm shims were silver and the 0.1mm shims were copper. Quite challenging to work this out yourself at 11pm at night under a fluro light.

Other than that, quality of the parts appear excellent. The plastics have a nice tactile feel and are well moulded. Would strongly suggest using proper hex drivers to make the building experience more enjoyable. Using an Allen key will lead to pain

I was lucky enough to find a second-hand D4 that came with enough parts to fully outfit the Cyber 10b. D4 shocks, WCE slipper, rear CVDs, etc. Eyeballing, everything looks like it will fit except for the center shaft CVDs. Will be able to confirm later this evening.

Here's a question - in the manual it indicates to add diff lube to the ends of all the dogbones. Does anyone do this in practise? My experience is it collects dirt and causes more damage.

Wondering if I should also diff lube the gearbox gears as per the manual. I've never done this to my 2wd Losi but not 100% sure if this is something unique to the HPI plastic gears.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com