|
|||||||||||||||
|
#12
|
||||
|
||||
|
This is the Elvo set-up for the Arendonk track, which is very flat and high grip, but I adapted it to the long wheelbase brace which Elvo wasn't running back then.
Front: Blue spring, 30wt, 3mm limiters Shock: 2-O, Camber link: 2-B, 1 washer Camber: -1.5°, -0.5° toe-in, caster 30° Schumacher Stagger Rib Yellow Wing on shock tower Arms below level Rear: Red spring, 27,5wt, red piston, 5mm limiters Shock: 2-I, Camber link: 2-B (second hole from the bottom on tower) Camber: -2°, 3° toe-in, 1° anti-squat Schumacher Mini Pin Yellow, outer row cut off CVD's below level Other: Long wheelbase brace on long wheelbase setting Rear hubs on medium setting Wing on low and forward position 30gr near nose 100gr of lead under battery pack ESC: 1-3-1-1 Motor: CS 7,5T on 24/78 During the day (when traction levels are slightly decreasing), I do the following things: - Front green spring - Rear shock position: 1-extra inner hole - 0° anti-squat What you could change for racing indoors: - Anti-roll bar - 23/81 gearing Car was amazing, easy TQ and victory on club race. |
| Thread Tools | |
| Display Modes | |
|
|