Go Back   oOple.com Forums > Car Talk > Team Durango

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 09-07-2010
reg's Avatar
reg reg is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Feb 2008
Posts: 2,276
Default

Quote:
Originally Posted by DaHomie View Post
All,

I just bought myself a (scarcely) used DEX410 and I feel I have to share a couple of tips I found when going through the car checking the condition of things.
I have seen mentioned both on oople and on another forum that the drivetrain does not run smooth and that motors run hot, short run times and so on.
One of the most crucial things to make sure you get right is the shimming of the differentials...
On the plastic case side the shim should be 0.2mm and on the spur side it should be 0.1mm. If you do not pay attention to this you will get the diff 1/10th of a mm to close to the pinion and this is enough for the drivetrain to bind heavily, make noise, cause gear damage and so on.
this isnt always true,if i have it like that on mine i can feel it get tight at one point,you need to work out which is the best way and the right ones to get the mesh loose on a full rotation
__________________





TRADE FEED BACK.... http://www.oople.com/forums/showthread.php?t=34486
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com