|
|||||||||||||||
|
#26
|
|||
|
|||
|
Just to let everyone know all Piston orders have been posted out this morning! Thanks for the orders.
Also I have been trying 3 hole pistons in the 22 over the last couple of weeks! I’m still experimenting with hole size but am finding the car to be a more stable and a little easier to drive. I’m currently running 1.45mm 3 hole front and 1.55mm 3 hole rears but am going to try a slightly larger hole this week for a little less pack. Ran the car this weekend at Grantham A1 racing new Astro track and car felt real easy to drive over a 5min race but could still put in very fast lap times. The track is bumpy with several different Astros giving a change in grip level from high to low grip My set up is listed below Front 37.5W Losi oil 3 hole 1.45mm taper piston Black spring Shock position middle on arm 2 on tower 2mm limiter fitted Camber link position 2 1mm under inner ball stud 2mm on outer ball stud Kick angle 25 degrees Caster 3 Degrees Camber -.5 deg Ride height 21mm Spindle trailing 2mm spacer moved to front of caster block Rear 32.5w Losi Oil 3 hole 1.55mm taper piston Pink springs (yellow gave a little more side bite but pink was faster if you was smooth with it) Shock position inside on arm 2 on tower Camber link B with 1mm spacer 2 with 2mm spacer 4 degree HRC 1 Degree anti squat Medium short wheel base HB 7” V wing Camber -2 Ride height 21mm Losi 96mm stubby Lipo No rear weight Short Lipo kit with all small weight moved to front 156g total Rear tyres Yellow mini spike 2 MRO Extra wide rear inserts Yellow staged rib front Dremeled No insert LRP x12 7.5 24/76 gearing |
| Thread Tools | |
| Display Modes | |
|
|