|
|||||||||||||||
|
#11
|
||||
|
||||
|
Quote:
Move your punch rate switch to 1%, which helps move the step point I was feeling away from throttle mid point. Punch stages are effectively a current limiter. I run both set to medium (or 15) depending on software version. I found having too much current limit (punch very weak) produced a harder to drive and steppy feel to the throttle combined with the 50% switch point. Throttle deadband, I reduced this to 50us with my sanwa after experimenting. This means there is less stick movement before the wheels start to turn. Recalibrate after altering this. It's a big help with the feel. I have a throttle expo curve on a switch on my sanwa so can switch in if I feel I want to smooth out the bottom end for slipper tracks Turbo on a 6.5 is a bit much for me, but check your delay time at full throttle that it kicks in. Too soon and it can kick in at the wrong point and upset the car. I don't run boost, seems a bit manic when I've tried it. Hope that helps you or someone else.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- Last edited by neallewis; 15-10-2015 at 12:42 AM. |
| Thread Tools | |
| Display Modes | |
|
|