New steering servo advice for 1/10 electric?

[AdrianH78]

Originally Posted by mattr

It's usually either 6 or 7.2V from ESC to receiver (and then through to the servo) Most 10th scale ESCs (all 10ths?) will be 6V.

8ths tend to be 7.2.

Need to look at the BEC output to be sure. (All my 10ths are 6V and somewhere between 2 and 3A, 8th is switchable between voltages and 3A)

Thanks for the advice

I checked the output from the receiver and this was 6.2v which is in range for that servo, so I think I'll go for it once I get paid

Many thanks for everyone's advice