|
#101
|
|||
|
|||
![]() Quote:
![]() I know I used to run a Checkpoint 9 turn on 21/81, so tell him to try about 23/81 to start with ![]() |
#102
|
||||
|
||||
![]()
rich over to you
__________________
HOBBYKING GEN2 120 AMP SPEEDOS ABSIMA AND YEAH RACING MOTORS SANWA RADIO XPERT AND ABSIMA SERVOS [FONT="Impact"]CARS ASSOCIATED B6 TEAM C TM4 TEAM C TC02 EVO TE[/FONT |
#103
|
|||
|
|||
![]()
Hi Jim,
Have a look at post number 88, at the moment I'm running the car like that with a couple of tweaks. The only changes are Orange/30w in the rear shocks and the steering link ballstud to the rear instead of the front. At worksop last weekend I dropped 5w all round to 40/25w as the oil gets thicker in the cold ![]() |
#104
|
||||
|
||||
![]() Quote:
__________________
___________________________ Neil Adamson |
#105
|
|||
|
|||
![]()
Yep, I meant losi orange pistons if you thought I meant springs
|
#106
|
||||
|
||||
![]()
No your set up sheet has black rear springs on it. I tried this but silvers worked alot better for me.
__________________
___________________________ Neil Adamson |
#107
|
|||
|
|||
![]()
according to the recommended setup in post #88, there is no mention of roll bars. under what conditions, if ever, do you suggest running them?
thanks ![]() |
#108
|
|||
|
|||
![]() Quote:
I know the AE lads run them on the rear of the B44, but I've never really liked what rollbars do to the car so never really run them. Sometimes a front rollbar can calm the car down a bit on super high grip tracks but it's generally not needed ![]() Rich |
#109
|
|||
|
|||
![]()
cheers Rich - thanks for the info
![]() |
#110
|
||||
|
||||
![]()
I run the thin black one on the rear of my car when racing inside, it actually kept the back end in line funnily...
HTH
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
#111
|
||||
|
||||
![]()
Are the losi springs the same as the BJ4 ones?
I have switched my shocks to losi ones do I then go with the same as in the setups or do I have to change weights hights springs etc? thanks |
![]() |
|
|