|
#1
|
||||
|
||||
TIPS & BUILD GUIDES
Just thought I'd link to some build tips and guides here as there seem to be a few new people picking up the 410 durangos for the first time and the TD website isn't yet helpful to find these guides and tips.
If you know of a guide / tip - whether it's an article, blog post or forum post that we could link to below, feel free to suggest it and we can add it into the list on this first post. Turnbuckle Build Guide http://www.team-durango.com/blog/201...e-build-guide/ DEX210 Motor Configuration Guide http://www.team-durango.com/blog/201...onfigurations/ DEX210 Ball Differential Build Guide – Part 1 http://www.team-durango.com/blog/201...ild-guide-pt1/ DEX210 – 25° CASTER MOD http://www.team-durango.com/blog/201...b0-caster-mod/ DEX210 - Setup Insert Guide http://www.team-durango.com/blog/201...-insert-guide/ 410 Gearbox build guide (all 410 buggies and SC) http://www.team-durango.com/blog/?p=2584 410 Diff Seal mod (all 410 buggies and SC) http://www.team-durango.com/blog/?p=3193 DESC410R 2mm Anti-Roll Bar set screw mod (works for the buggies also) http://www.team-durango.com/blog/?p=3461 1/10th scale BIG BORE spring charts (for all TD cars using Big Bores) http://www.team-durango.com/blog/?p=3292 DESC410R +1 Degree rear hubs (applies to the buggies also) http://www.team-durango.com/blog/?p=2932 DESC410R Centre Diff Option (pretty much totally eliminates broken gears and feels better on the track) http://www.team-durango.com/blog/?p=2891 DESC410R – Slipper Setting http://www.team-durango.com/blog/?p=2787 Anti-Roll Bar Installation (410 buggies and SC) http://www.team-durango.com/blog/?p=2084 Shock build guide (for small bores - but the build is the same) http://www.team-durango.com/blog/?p=1232
__________________
If your PM doesn't at first succeed - try, try again. I'll reply in the end, honest. Last edited by jimmy; 06-12-2011 at 05:05 PM. |
#2
|
||||
|
||||
Nice one jimbo
__________________
Stevie Brew BW-RACING@HOTMAIL.COM http://www.oople.com/forums/showthre...hlight=stegger |
#3
|
||||
|
||||
thanks so much jimmy! this is awesome
|
#4
|
|||
|
|||
Really useful Thanks
|
#5
|
||||
|
||||
very useful information I think that I will use it during building of my DEX 410v3
__________________
As body paint as he goes..™ |
#6
|
||||
|
||||
Added the link to the 210 Insert guide that Adam Skelding posted.
__________________
If your PM doesn't at first succeed - try, try again. I'll reply in the end, honest. |
#7
|
||||
|
||||
With the diff seal mod does it have to be the durango o-rings or are there others that fit?
|
#8
|
||||
|
||||
People used to use kyosho 'P5' seals, they started to get hard to find, i would imagine the durango ones would be more easy to get hold of .
|
#9
|
||||
|
||||
There is a good shock oil conversion chart on the Durango site too (don't have link to hand sorry) that might be worth adding too.
|
#11
|
|||
|
|||
Turnbuckle build guide.... here http://www.team-durango.com/blog/201...e-build-guide/
__________________
Steve Butts Team Durango USA, AKA Racing, Speed Passion USA,Racers Edge, Savox, TrackStar RC |
#13
|
||||
|
||||
Another 210 guide from Durango
Already in list..
|
|
|