|
#1
|
||||
|
||||
TRF 201X - 2WD SETUPS
Please use this thread for posting setups for the Tamiya TRF 201X buggy only.
__________________
If your PM doesn't at first succeed - try, try again. I'll reply in the end, honest. |
#2
|
||||
|
||||
|
#3
|
||||
|
||||
Thanks Jimmy
Here is the setup that I've been running on this amazing buggy: |
#4
|
|||
|
|||
Here's mine from the last taplow sunday meeting.
__________________
~ICON-RC~ATOMIC CARBON~LMR~TONISPORT~NUCLEAR RC~
|
#5
|
|||
|
|||
Gents
Can you measure overall length of your shocks please, or even better dimension b on the setup sheet ? thanks spud |
#6
|
|||
|
|||
Sorry for the late reply.
Measurement B on sheet is 18mm front and 26mm rear when the shock is at full length.
__________________
~ICON-RC~ATOMIC CARBON~LMR~TONISPORT~NUCLEAR RC~
|
#7
|
|||
|
|||
Diamond thanks v much
|
#8
|
||||
|
||||
Hi Chaps,
Looking for a setup sheet for my 201 for grass also what tyres/inserts to use. any help much appreciated Cheers Dez |
#9
|
||||
|
||||
Hi guys
i am also looking for a good setup to use at the midland astro masters at kidderminster and coventry if anybody has any ideas i would be great full. Many thanks in advance Rob |
#10
|
||||
|
||||
TRF 201X - Castlehill Sydney Australia
There is probably a little more to be found in this set up, especially the gearing. Will be purchasing some 29 to 32 tooth pinions for next time. Suspension worked really well. Most confident I've felt with the car yet. track was damp in the morning, but dried out during the day and griped up.
Update 29 April 2012 - Ran at the Castehill ProAm (interclub challenge). Missed A Final by only 3 seconds (bummer). the only changes from the set up sheet are: 32t pinion, Associated front wheels mounted with Losi Blockheads
__________________
Regards, David Secretary/Treasurer Southern Highlands Off Road R/C Car Club Inc. (NSW Australia) http://shorrcccinfo.wix.com/shorrccc www.facebook.com/SHORRCCC Last edited by Aussie Top Force; 29-04-2012 at 10:02 AM. Reason: Updated Setup |
#11
|
||||
|
||||
TRF201, pinion???
hi, just bought myself a used trf201.... on its way across the waters to me now.
I run a 22 at present and have run the cougar etc. question.... running a 10.5t GM, with r10 pro esc, with turbo and timing etc. what pinion would you recommend on the kit spur gear. For smaller tracks(shrccc) with lots of turns and the also the faster sweeping tracks(torch/stotfold) not run a tamiya as yet so just need an idea of where to start.... cheers muchly.
__________________
XB4 & MORE , Team Xray, Team Gainsy Graphics, DPP Racing 2013 & 2014 OOPLE INVERNATIONAL BEER RACE RUNNER UP! FEEDBACK LINK =
|
#12
|
||||
|
||||
I run a 4600kV motor (don't know how many turns it is) with 79T spur and 23T pinion - the temperatures seem good in this config for both ESC and motor, though I think I could run it with a slightly bigger pinion. For the club track (clay with a reasonably short straight) it works very well imo. Here is a video of the track:
http://www.youtube.com/watch?v=YkBn5aEmnrc For the longer tracks like Kampenhout and Arendonk (both Astroturf, Arendonk has a humongous straight) it lacks some top speed - I could solve that with the gearing, but I guess a quicker motor would be better (hence why I bought a 5200kV motor). Kampenhout: http://www.youtube.com/watch?v=XlgcmO1csp8 Arendonk: http://www.youtube.com/watch?v=tbCrDOrbMuQ What I'd recommend you to do in the long term though is to find a gear ratio that works for you with the kit spur and then get a smaller spur and pinion so the motor is further forward. It's visible in Lee Martin's (amongst others) setups for astroturf, and though my car felt good without it, I can imagine on dry astroturf it would help get the car to perform that little bit better |
#13
|
||||
|
||||
|
#14
|
||||
|
||||
I think it says shaved... so it suggests some material has been taken off the rear brace... It remains a bit open to interpretation what rear brace it is, as there are several bracing constructions on the rear, but I think the driver means the RR/rearmost suspension hanger.
|
#15
|
||||
|
||||
Recent Set up for my XR on Blue Groove Dry Clay
Recent Set up for an endurance race with my XR.
__________________
Regards, David Secretary/Treasurer Southern Highlands Off Road R/C Car Club Inc. (NSW Australia) http://shorrcccinfo.wix.com/shorrccc www.facebook.com/SHORRCCC |
#16
|
||||
|
||||
Have a really good set up for you TRF201XR users that are on a Med-High grip clay track.. also put a lot into this car to get the weight down as well
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
|
|