Go Back   oOple.com Forums > General > Vintage RC > For sale

Reply
 
Thread Tools Display Modes
  #1  
Old 25-04-2021
Lowry Lowry is offline
Member
 
Join Date: Apr 2010
Posts: 113
Default Ultima Pro Runner chassis

Up for sale is a fully restored and fine-tuned Ultima Pro Runner Chassis.
This is the first Pro-Version with the original wishbones, a flat aluminum chassis, the first idler gear in M0.6, a ball-diff in the rear, the motor guard, turnbuckles all around and of course the gold shocks.
  • The ball diff was checked and newly greased and runs really smooth
  • In the gearbox a 1,5 mm long 5/6 mm shim tube was placed between the inner upper gear (next to the diff) and the ball bearing to optimize the axial play (it now runs super-smooth)
  • Also the hole of the axle of the idler gear on the outside was slightly increased because this hole was from Kyosho slightly displaced (causing really rough running outer gears in original condition)
  • At the rear the mounting of the upper deck was improved by using 2 x long M4 screws from the chassis underside and use 2 x M4 lock-nut at the top-deck
  • The middle linkage of the steering was replaced by small ball-joints but can be rebuilt to the original state
  • The upper deck was broken in front. Therefore a separate front top part was made out of 3,3 mm woven carbon.
  • The rear tyres are new but no idea about the brand; they are unglued
  • Of course checked and good ball bearings everywhere
  • The turnbuckles in the front are original but the coating was removed. They therefore have a gun-metal-look.

I think the car is ideal to be run in vintage races. If you need the battery mounts I can also add them.

Looking for 120 Euro plus postage but open for fair offers.
Attached Images
File Type: jpg 20210425 Ultima Pro Overview.jpg (207.7 KB, 74 views)
File Type: jpg 20210425 Ultima Pro Front.jpg (229.5 KB, 41 views)
File Type: jpg 20210425 Ultima Pro Gearbox.jpg (152.6 KB, 50 views)
File Type: jpg 20210425 Ultima Pro Rear.jpg (209.4 KB, 42 views)
File Type: jpg 20210425 Ultima Pro Underside.jpg (235.1 KB, 44 views)

Last edited by Lowry; 01-05-2021 at 12:49 PM. Reason: Sold
Reply With Quote
  #2  
Old 26-04-2021
tintin74's Avatar
tintin74 tintin74 is offline
New Member
 
Join Date: Aug 2014
Location: Geneva Switzerland
Posts: 18
Default

HI, Interested in this Ultima, how much would it cost to ship it to France?

Thanks.
__________________
Check my website at www.kyosho-optima.com!

And my Facebook Group at https://www.facebook.com/groups/optimaseries/
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:31 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com