|
#1
|
||||
|
||||
new tires available for the mini :)
http://www.racing-cars.com/sp/catego...d_Inserts.html
Great news, schumacher now do tires for the m-chassis
__________________
Website: http://www.wbmcc.co.uk/bingham-model-raceway.html Schumacher Cat Xls, Rc10 Team(retired), Mardave Cobra, SST 98 Rally Car, TT02 Rally car, Wpl-c24 and Element Enduro builders kit #71 #deaddogracing Autocare, unit 5 candleby Court, Cotgrave NG123RT. |
#2
|
|||
|
|||
Oh cool they are doing pit shimitzus again. They were always really good on carpet.
__________________
Robert Jaques, Schumacher Racing KC, K2. Team Associated SC5M "The Japanese Sniper" Team Autocare & Cycles |
#3
|
||||
|
||||
Oh cool, Are you stocking them Dave?
Can you get a pair of each in for me for Friday? |
#4
|
||||
|
||||
Quote:
Shimizu Tyres & Inserts for M Chassis cars Now available, new tyres from Shimizu for Tamiya M Chassis sized vehicles. 3 Compounds to choose from, Hard, Medium and Soft. Specially developed for carpet racing. The soft tyres will give the most traction but can overheat in warmer conditions. The medium is a very good all round tyre for most conditions. If the steering is too aggressive then use one grade harder tyre on the front than the rear such as medium rear and hard front. Supplied with inserts in pairs.
__________________
Website: http://www.wbmcc.co.uk/bingham-model-raceway.html Schumacher Cat Xls, Rc10 Team(retired), Mardave Cobra, SST 98 Rally Car, TT02 Rally car, Wpl-c24 and Element Enduro builders kit #71 #deaddogracing Autocare, unit 5 candleby Court, Cotgrave NG123RT. |
#5
|
||||
|
||||
Hi guys could you point me in the right direction for a quicker motor for my m03
|
#6
|
||||
|
||||
what are you running at the moment?
__________________
www.wbmcc.com |
#7
|
|||
|
|||
If you are using the kit speed control then a Tamiya Sport Tuned is safe but pricey. I have run a HPI Firebolt 15 turned brushed motor with a stock speedo but it did melt the speedo case eventually (I think they're only rated down to 23 turns). If you want to shell out £60 or so the Hobbywing EZrun 13t brushless speedo and motor combo is good.
|
#8
|
||||
|
||||
Hi I'm a bit thick being a newby but this is what's in the mini now STANDARD SILVER CAN MOTOR.
NOSRAM HAWK ESC, |
#9
|
||||
|
||||
In that case a good step up would be the Sport Tuned (AKA "Black Can") motor.
I've also seen a few people using the Ansman Clash motors - your esc should be able to handle them ok
__________________
www.wbmcc.com |
#10
|
||||
|
||||
Cheers Chris think I'll go the ansmann way for now what turn clash motor would you recommend it's a 20 tooth pinion on at mo
|
#11
|
||||
|
||||
I think the silver can motor is a 27T so maybe go for the Clash 23T.
I've never raced an M03 so im not sure what pinion you should use, however when I went brushleshless in my M05 I didn't change the pinion and have never suffered any overheating issues (even after fitting the high-speed gear set).
__________________
www.wbmcc.com |
#12
|
|||
|
|||
Forgot about the Clash, didn't know if they still made them. I'd second Chris on that, a 23t one is better than the silver can and they ARE as cheap as chips.
|
#13
|
||||
|
||||
Cheers gents hopefully get one sorted for next week
|
#14
|
||||
|
||||
I run an ansmann 23turn in my m03 and its fast. Doesnt get too hot either. I use a 20t pinion too.
__________________
Chris Brown. rb5, Mission, F109, F103, F104v2 titanium, F104v2 black, 2 FF01s, FF03, TA02, TA04ss, TA04r, TA05, TT01, TL01, trf 415, M01, M02, 2 M03s, M04, M05, M06, XEVO, DB01, T2R Pro, TC3, b3, SC10, RC10 R5, E Revo, MR4 TC, MR4 TC worlds, MR4 BC SP, Ym34, xxx-t, Mad Rat, Predator DTM, Holiday Buggy (red), H.B (blue), dt03. |
#15
|
||||
|
||||
Ansmann 23T
The ansmann 23T has been ordered see u on Friday with it if it arrives
|
Thread Tools | |
Display Modes | |
|
|