|
#1
|
|||
|
|||
Required option parts for a yz-2
hi all.
I'm thinking about getting a yz-2 (currently have a b5m with a low rider gearbox) and was wondering what option parts are good to get? I know lots of people highly recommend and highly recommend getting the bmax 4 arms and the bmax 2 driveshafts, but is that the only main one worth getting? I know there are Gill wing front arms and a ball diff and under lipo weights etc, but are things like those worth getting? Also, are there parts of the car that wear out or break easily? Thanks in advance for your help! |
#2
|
||||
|
||||
You don't need options. Only thing is springs. But you can use Asso springs as well. That's up to you.
__________________
Numquam cedunt victores, numquam ignavi vincunt. |
#3
|
|||
|
|||
Ok thank you. Just reading through the past few posts, lots of people say the different rear arms and shafts really improve the car. Thanks for your help
|
#4
|
|||
|
|||
Yeah I just got a YZ-2 myself for the first time and was wondering the same thing. I got the Bmax4 rear arms and B2 drive shafts. Gull wing front arms and shock tower also. And the 30 degree front hinge pin block. going to machine up my own delrin shock pistons as they are always out of stock. And make my own alloy wing buttons also.
All in the aim to take the twitch out of the car. I hate twitchy super reactive cars. Coming from a kyosho RB6 and that thing is so hard to drive its too twitchy. Cant tune it out just the nature of the beast. (This is on carpet) Seems to be the way everyone is going though which sux. |
#5
|
|||
|
|||
It really is very good out of the box.
You will want stiffer springs if you are running outdoors on astro and a bit of weight under the lipo made my car even easier to drive (same with most cars). The rear bmax4 arms and dogbones made the car better for me - bit more stability without any noticeable loss of steering. They are not a necessity. I tried the front gullwing wishbones and shock tower and to be honest could not really notice any difference to lap times or feel of car. Possibly need a better driver who can feel more subtle changes in set-up? I have left them on car as did not notice difference but won't replace if I break one, will just go back to standard. Edit: forgot to mention, this is outdoors on medium grip astro. HTH Rob
__________________
____________________________ Rob Warren Yokomo Cal3.1 Yokomo YZ4 SF2 |
#6
|
||||
|
||||
Springs and weight, two of the best things you can add to this car. I also run the Bmax rear end mind, but TBH its not a necessity.
lee
__________________
INSERT COIN
|
#7
|
||||
|
||||
Don't worry yourself about who's running what. Get the car, build it and run it. You'll love it. In the near future you start changing stuff but it's not needed.
__________________
Team Associated Hobbywing SRT Reedy My feedback http://www.oople.com/forums/showthread.php?t=63097 |
#8
|
|||
|
|||
Thanks for the help everyone. Gonna get one ordered today. What sort of parts break/ wear out easily? Just want to know incase there are some spares I should order right from the off. Thanks.
|
#9
|
||||
|
||||
I shouldn't be saying this as I travel to mendip for a weekend of racing, however we haven't broke anything on our yoks.
Oh we did break a bulkhead but that was caused by a collision with a rostrum.
__________________
Aidan Burke - Southport Radio Car Club #SchumacherFamily #TQmodels #ExtraLapRCpodcast |
#10
|
||||
|
||||
Fit some tyres, add a little weight, stiffen the springs. The drive the nuts off the thing!
__________________
Current Weapons: YZ2-CA, YZ2-DT, YZ-4SF. In The Pits: Yokomo R12C, Yokomo MR4-TC Custom, Yokomo MR4-TC Pro, Yokomo MR4-Rally, Tamiya Blitzer Beetle, Tamiya M05. Driven: Race Red Fiesta ST
|
#11
|
||||
|
||||
straight from the box, it is superb. I haven't even gone for the ball diff!
I've broken nothing on mine (yet), but have seen one broken rear hanger (they make an alloy version now or just save money and replace with plastic ), one broken rear arm and that is it Oh, and use threadlock. I didn't (I know, I know!!) and had a few nuts work loose.
__________________
I've got Araldite and a Swiss Army Knife - what more do I need? Yokomo YZ-2 No 4WD because nothing lives up to my original Optima. Until now maybe?... |
#12
|
||||
|
||||
Loose nuts are never nice.
__________________
Current Weapons: YZ2-CA, YZ2-DT, YZ-4SF. In The Pits: Yokomo R12C, Yokomo MR4-TC Custom, Yokomo MR4-TC Pro, Yokomo MR4-Rally, Tamiya Blitzer Beetle, Tamiya M05. Driven: Race Red Fiesta ST
|
#13
|
|||
|
|||
Ok thanks everyone. What stiffer springs would you recommend?
|
#14
|
||||
|
||||
Yatabe orange front and green rear
__________________
TLR, Screwz4RC, Spektrum, Horizon Hobby, Trinity, Trishbits, Racer, RichPaint, RDT products, Sanwa, Zen Racing, Silverback Lipo's http://www.screwz4rc.co.uk My Trader Feedback - http://www.oople.com/forums/showthre...hlight=tyreman
|
#15
|
||||
|
||||
Quote:
__________________
TLR, Screwz4RC, Spektrum, Horizon Hobby, Trinity, Trishbits, Racer, RichPaint, RDT products, Sanwa, Zen Racing, Silverback Lipo's http://www.screwz4rc.co.uk My Trader Feedback - http://www.oople.com/forums/showthre...hlight=tyreman
|
#16
|
||||
|
||||
I haven't bothered changing the front or rear arms although some stiffer springs are essential for high grip. I also prefer the ball diff which I'm running everywhere.
This is a very tough car. Things I've broken so far are several left rear arms (not all my own fault haha), bent hinge pin, front bulk head, rear hub. Make sure you thread lock everything or you'll be tightening the hole car after every run. |
#17
|
|||
|
|||
Ok thanks. I've ordered the yatabe arena yellow front spring and the yatabe arena green rear spring. Will those be ok? Did a bit of research and that seems to be what everyone is running
|
#18
|
|||
|
|||
Yes these are a good choice.
__________________
Ardgay Models Schumacher CORE-RC Hobbywing Mark One Designs |
|
|